Unpatterned Bioactive Poly(Butylene 1,4-Cyclohexanedicarboxylate)-Based Film Fast Induced Neuronal-Like Differentiation of Human Bone Marrow-Mesenchymal Stem Cells

Herein, we present poly(butylene 1,4-cyclohexanedicarboxylate) (PBCE) films characterized by an unpatterned microstructure and a specific hydrophobicity, capable of boosting a drastic cytoskeleton architecture remodeling, culminating with the neuronal-like differentiation of human bone marrow-mesenchymal stem cells (hBM-MSCs). We have used two different filming procedures to prepare the films, solvent casting (PBCE) and compression-moulding (PBCE*). PBCE film had a rough and porous surface with spherulite-like aggregations (Ø = 10–20 μm) and was characterized by a water contact angle = 100°. PBCE* showed a smooth and continuous surface without voids and visible spherulite-like aggregations and was more hydrophobic (WCA = 110°). Both surface characteristics were modulated through the copolymerization of different amounts of ether-oxygen-containing co-units into PBCE chemical structure. We showed that only the surface characteristics of PBCE-solvent-casted films steered hBM-MSCs toward a neuronal-like differentiation. hBM-MSCs lost their canonical mesenchymal morphology, acquired a neuronal polarized shape with a long cell protrusion (≥150 μm), expressed neuron-specific class III β-tubulin and microtubule-associated protein 2 neuronal markers, while nestin, a marker of uncommitted stem cells, was drastically silenced. These events were observed as early as 2-days after cell seeding. Of note, the phenomenon was totally absent on PBCE* film, as hBM-MSCs maintained the mesenchymal shape and behavior and did not express neuronal/glial markers.     

三种回生抗性淀粉对米淀粉的冻融与流变性质的影响

研究了添加锥栗、马铃薯与绿豆回生抗性淀粉(RS3)对米淀粉的冻融稳定性与流变学性质的影响。结果表明:添加锥栗、马铃薯与绿豆RS3都能显著提高米淀粉凝胶的持水率,且冻融超过3次后,其影响的差别越来越显著。随着冻融次数增多,米淀粉凝胶中不易流动水明显降低、自由水显著增加;当冻融次数相同时,添加RS3可使米淀粉凝胶中不易流动水明显增多而自由水显著减少。添加锥栗、马铃薯和绿豆RS3后,米淀粉糊的黏性模量明显增加,而弹性模量的增加更加显著。在相同剪切速率下,添加锥栗、马铃薯和绿豆RS3可以使米淀粉糊的抗剪切强度大大增强。添加相同质量浓度的锥栗、马铃薯和绿豆RS3后,米淀粉糊的稠度系数都大大升高、流体指数和滞后环面积显著减小。     

拉深筋对板材变形特征和力学性能的影响研究

采用实验方法将金属板材拉过不同尺寸的拉深筋镶块，分析了拉深筋高度、圆角半径以及过筋次数对板材变形特征的影响规律，研究了过筋产生的预应变对板材后续力学性能的影响规律。结果表明：板材流过拉深筋后，流动方向上发生均匀的拉伸变形；过筋产生的预应变随着拉深筋高度增大而增大，随着圆角半径增大而减小，随着过筋次数增加而近似线性增大；预应变越大，材料后续屈服强度和抗拉强度越高，但后续延伸率越小，总延伸率随着预应变增大表现出先减小后增大的趋势。     

Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

ABSTRACT

Medium-Mn steels are energetically investigated as a candidate of the third generation advanced high strength steels (AHSSs). However, their phase transformation and microstructaure evolution during various heat treatments and thermomechanical processing are still unclear. The present study first confirmed the kinetics of static phase transformation behaviour in a 3Mn-0.1C medium-Mn steel. Hot compression tests were also carried out to investigate the influence of high-temperature deformation of austenite on subsequent microstructure evolution. It was found that static ferrite transformation was quite slow in this steel, but ferrite transformation was greatly accelerated by the hot deformation in austenite and ferrite two-phase regions. Characteristic dual-phase microstructures composed of martensite and fine-grained ferrite were obtained, which exhibited superior mechanical properties.

This paper is part of a Thematic Issue on Medium Manganese Steels.     

Unique crystal structures and their applications as materials for Li1+x-yM1-x-3yTix+4yO3 (M = Nb or Ta, 0.07 ≤ x ≤ 0.33, 0 ≤ y ≤ 0.175)

In the Li₂O–M₂O₅–TiO₂ (M = Nb or Ta) system, Li_1+x-yM_1-x-3yTi_x+4yO₃ (LMT) forms with a superstructure known as the M-phase, in which the periodical intergrowth layers are inserted in a matrix having a trigonal structure of LiMO₃. We have been investigating this unique material focusing on its crystal structure, photoluminescence, and electrical properties.First, the formation area of the superstructure was compared between Nb- and Ta- systems and the difference was accurately analyzed.Second, to apply this unique material as a host material of phosphor, we synthesized new phosphors with various emission colors. Red phosphor, having a high PL intensity with an internal quantum efficiency of 98%, was successfully synthesized and used as a host material of the solid solution for the Ta system. Its high value was the result of the large centroid-to-cation distance of the Eu³⁺ position in the [(Li, Eu)O₁₂] polyhedral.Further still, toward application of the unique qualities of an electro-ceramic, we successfully fabricated oriented balk ceramics for the Nb system by slip casting in a strong magnetic field of 12 T. As a result, anisotropic electric properties were found along the c-axis, which were caused by the superstructure. We first clarified the mechanism showing that the anisotropic Qf value was due to anisotropic electron conductivity and anisotropic bonding strength within the superstructure.     

废脱硫剂在铁矿烧结中的应用

钢厂煤气脱硫工序排放的废脱硫剂是一种难以利用的有害固体废弃物，含一定量的铁及较高的钙和硫等元素。对废脱硫剂配入铁矿粉中进行了烧结杯的试验研究，结果表明，当废脱硫剂配比超过01%后，随着废脱硫剂配比的升高，烧结矿转鼓强度下降，利用系数下降，烧结烟气中SO2与NOx浓度增加，烧结矿的还原度有所下降，但烧结矿的低温还原粉化性能有所改善。烧结矿的矿相研究发现，废脱硫剂配比偏大时，磁铁矿体积分数增大，铁酸钙体积分数减少，并由针状结构向柱状、板状演变，烧结矿的气孔率上升。主要原因在于其粒度偏粗，含硫高，不利于成矿。当废脱硫剂粒度为-63mm及其配比控制在01%时，烧结矿的产量和质量有所改善，烟气中SO2、NOx较基准试验变化不大。工业试验表明，在烧结混匀矿中配入废脱硫剂配比小于012%时，烧结矿产量和质量没有明显变化，烧结烟气脱硫脱硝效果也没有受到影响。废脱硫剂掺入铁矿中进行烧结是一种资源化利用的有效方法，不仅解决了有害固体废弃物对环境的影响，而且使二次资源得到综合利用。     

高强度大桥缆索用盘条生产现状分析

最近5年，大桥缆索用镀锌钢丝抗拉强度有了大幅提高，从1 770 MPa级、1 860 MPa级、1 960 MPa级到目前的2 000 MPa及以上级别，扭转指标有了颠覆性的改变，从之前的几转到目前的十几转、二十几转。论述了国内外钢铁企业生产大桥缆索镀锌钢丝用盘条的不同现状。从成分设计、生产工艺流程、盘条韧化处理方式和组织特点等方面进行阐述，讨论了国内外不同生产工艺特点及发展趋势，为中国大桥缆索镀锌钢丝用盘条的生产提供理论支持。     

Hydrolysis-resistant polyurethane elastomers synthesized from hydrophobic bio-based polyfarnesene diol

Hydrolytic stability is an essential requirement for polyurethanes (PUs) that are used in highly humid and aqueous environments. In this study, hydrolysis-resistant PU elastomers (PUEs) are synthesized based on hydrophobic bio-based polyfarnesene diol (PFD), which contains unique “bottle brushes” structure (with long branched hydrocarbon side chains). The effect of hard segment (HS) content, ranging from 30 to 50%, on the morphology and properties of PUEs is investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, tensile, water absorption, and contact angle measurements. The results show that there are prominent phase separations in the synthesized PUEs. The PUEs show a three-stage degradation process and two T_g, one is at about −66 °C and the other 61 °C, which are related to the soft segment and HS, respectively. Water contact angles of PUEs increase from 98.6 to 105.2° with the increasing of PFD structural unit fraction. After being immersed in deionized water for 30 days, PUEs show no significant degradation of both tensile strength and elongation at break, and mass changes of all samples are less than 0.5%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47673.     

Improving the luminescence properties and powder morphologies of red-emitting Sr0.8Ca0.19AlSiN3:0.01Eu2+ phosphors for high CRIs white LEDs by adding fluxes

Red-emitting Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphor with halide fluxes for use in the production of white light-emitting diodes (white LEDs) with high-colour rendering indices (CRIs) was prepared through the high-temperature solid-state method. Fluoride (NaF, SrF₂, BaF₂, CaF₂, AlF₃·3H₂O and CeF₃), chloride (NH₄Cl, BaCl₂, MgCl₂, NaCl and LiCl) and composite fluxes (NaF + SrF₂, SrF₂+NH₄Cl and NaF + NH₄Cl) were applied in the phosphors. NaF, SrF₂, NH₄Cl and NaF + SrF₂ fluxes had prominent effects on the characteristics of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors. Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ phosphors with various powder morphologies can be obtained through the addition of fluxes, which are conducive for phosphor formation. The powder morphologies of phosphors incorporated with NaF + SrF₂ were preferable to those of powders incorporated with other fluxes. This result indicated that the incorporation of NaF + SrF₂ into Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺ yielded phosphors with high luminescent intensity and quantum efficiency, excellent thermal stability, narrow full widths at half-maximum (FWHM, 75.2 nm), uniform rod-like morphologies with large particle sizes (D₅₀ = 16.99 μm) and good particle dispersion. White LEDs with high CRIs were obtained by combining prepared phosphors (NaF + SrF₂ additive) with the commercial green-emitting phosphors Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺. White LEDs with Y₃(Al,Ga)₅O₁₂:Ce³⁺ and (Sr,Ba)₂SiO₄:Eu²⁺ phosphors had correlated colour temperatures (CCTs) of 3064 and 3023 K, respectively, and CRIs of 81.8 and 92.4, respectively. Therefore, NaF + SrF₂ can be used as a favourable flux for the production of Sr_0.8Ca_0.19AlSiN₃:0.01Eu²⁺.     

固体碳直接还原钢铁厂含锌固废的理论与实践

 钢铁厂内的含锌固废数量巨大，同时富含铁、碳等元素，是可循环再利用的二次资源。通过固体碳直接还原ZnO和FeO的热力学分析，发现在非标准状态下，ZnO的还原条件要优于FeO。为此，在实验室条件下设计了含锌固废在不同温度和时间下的还原试验，发现在还原温度为1 423 K、还原时间为15 min以上时，脱锌率可达到90%，而铁的金属化率需要在1 573 K时才能接近90%；在还原温度低于1 423 K时，还原时间对脱锌率的影响较大；在还原温度高于1 473 K时，还原温度对脱锌率影响较小，同时脱锌率可达到95%。这些结果对国内当前处理含锌固废主要工艺(回转窑、转底炉)的操作制度设置具有重要的参考价值，也为如何选择合理的工艺路线，以低投入、低运营成本实现含锌固废的再利用提供了理论依据。